AQUARIO NEO CO2 System Complete Kit

  • Sale
  • Regular price Rs. 2,249.00
Tax included. Free Shipping

Aquario NEO DIY CO2 Kit is the perfect CO2 system for beginners. Carbon is an important nutrient needed by plants to grow. The best way to supply your plants with the carbon they need is through carbon dioxide (CO2). The Aquario NEO DIY CO2 Kit is the perfect solution to your CO2 needs. The simple instructions and ease of use allow any beginner or experienced hobbyist to achieve the best plant growth by introducing CO2 to their aquarium. The Aquario NEO DIY CO2 Kit utilises a natural and proven concept to provide the right amount of CO2 suitable for planted aquariums for up to 50-60 days. We recommend using one bottle for every 20-30 gallons (75 Litres - 112 Litres) of water, so if your tank is larger, multiple bottles can be used concurrently.     

This kit comes with everything you need to start injecting CO2 to your aquarium: 
1 x NEO CO2 Bottle
1 x NEO CO2 Bio Powder
1 x Aquario NEO CO2 Diffuser
1 x CO2 Tubing
2 x Suction Cups
1 x O-Ring


Step 1: Water
Put 300ml of warm water (About 30. Hot water 50%+ normal water 50%) into the container.
(Do not keep bottle in direct front of AC first day)

Step 2: Shake
After closing the cap, shake at least 100 times until thoroughly mixed.
(Do Not shake the bottle after 24 hours after jelly has formed)

Step 3: Wait
Allow the bottle to sit for 24 hours without interruption or disturbance. The liquid will thicken into a gel-like consistency.

Step 4: Activate
Put in 1 NEO CO2 Bio packet and 1 cup (about 200ml) of room temperature water around 77°. Install the reaction cap onto the bottle, no shaking is required.  Connect the flexible tubing on one end to the reaction cap and the other through the suction cup and onto the diffuser. Place the diffuser into your aquarium and wait. 
(Do not shake the bottle after putting bacteria with 200 ml water. )

Step 5: Repeat
When CO2 output slows down or stops completely, remove the cap and pour the liquid out. Repeat steps 3 to 4 until the gel is fully consumed.

How Neo CO2 works?

Neo CO2 helps grow aquatic plants by continuously supplying co2 which is essential for growth at the lowest cost.
The origin of Neo CO2
C6H12O6 => 2C2H5OH + 2CO2 + 2ATP
Neo CO2 supplies Co2 stably Co2 stably for about 50 days.

Additional Important information:
The DIY CO2 Kit by Aquario is designed for smaller tanks, you run the risk of providing too much Co2 and depleting oxygen levels which can be deadly for your fish and shrimp. If you choose to use it on nano tanks smaller than 10 gallons, we recommend running an air pump when the lights are off or if you notice your fish gasping at the surface. If you don’t have an air pump, creating any surface agitation in the water will also provide oxygen to degas excessive CO2.  (This will only happen in very small tanks  such as table Aqauriums, you can also use less power to solve the issue)

Usage life can vary depending on the temperature. The recommended room temperature ranges from 68° to 86°. The higher the temperature, the faster the CO2 depletes itself and the shorter the duration of usage.

Depending on the temperature, the co2 will run out faster, for example we have noticed the following life amount feedback from our hobbyists:
Bangalore - 50 days
Mumbai.    - 50 days 
Chennai     - 54 Days
Kolkata      - 50-55 Days
Orissa        - 50 Days
Delhi          - 50-55 Days

Keep out of the reach of children.

Aquario Brand Website: Link
You can refill this product by using Aquario Neo Refill Kit 

Produced 100% in South Korea


    Customer Reviews

    Based on 1 review
    Sudipta Sarkar
    Good co2 system

    Good co2 system works like a charm